The amount of ram required for the framebuffer will vary depending on the size of the screen, and will reduce the amount of video ram available to the modes. Because the rendering is all done into a virtual framebuffer acceleration can not be used. When it is finished scanning it will automatically update them to the latest, most compatible version. This option will override the detected amount of video memory, and pretend the given amount of memory is present on the card. It has the same ID and is identified as a when probed. In fact the timing for the flat panel are dependent on the specification of the panel itself and are independent of the particular mode chosen. However, 8 and 24 bit colour depths seem to work fine.

Uploader: Kajigal
Date Added: 18 February 2018
File Size: 29.70 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 20495
Price: Free* [*Free Regsitration Required]

The Xorg X server, allows the user to do damage to their hardware with software with old monitors which may not tolerate bad display settings.

Information for Chips and Technologies Users

This driver uses this capability to include a 16bpp framebuffer on top of an 8bpp framebuffer. Hence the maximum dot-clock might need to be limited. Although the authors of this software have tried to prevent this, they disclaim all responsibility for any damage caused by the software. So for unexplained problems not addressed above, please try to alter the clock you are using slightly, say in steps of 0.

If the user has used the ” UseModeline hechnologies or ” FixPanelSize ” options the panel timings are derived from the mode, which can be different than the panel size. Next, Easy Driver Pro searches a database of over 11 million drivers and matches missing, corrupt, or obsolete Drivers to the latest, most compatible drivers for your operating system.


This technologoes a driver limitation that might be relaxed in the future. Some users prefer to use clocks that are defined by their BIOS. With the chips and later or thethe default is to use the programmable clock for all clocks. Please read the section below about dual-head display. For a complete discussion on the dot clock limitations, see the next section.

Information for Chips and Technologies Users

In addition to this many graphics operations are speeded up using a ” pixmap cache “. When it is finished scanning it will automatically update them to the latest, most compatible version. But assuming your memory clock ttechnologies programmed to these maximum values the various maximum dot clocks for the chips are.

It checks everything such as sound card, graphic card, monitor, mouse, printer, etc. This option forces the LCD panel size to be overridden by the modeline display sizes. The effect of this problem will be that the lower part of the screen will reside in the same memory as the frame accelerator and will therefore be corrupt. This chip is basically identical to the This chip is similar to thebut it also includes XRAM support and supports the higher dot clocks of the So using this option disables the XVideo extension.

Chips and Tech. PCI PCI Drivers – Download Device Drivers – –

This reduces the amount of video ram available to the modes. Secondly, the memory bandwidth of the video processor is shared between the two heads. This is a debugging option and general users have no need of it. A basic architecture, the WinGine architecture techhologies is a modification on this basic architecture and a completely new HiQV architecture.


Note that the ” -bpp ” option has been removed and replaced with a ” -depth ” and ” -fbbpp ” option because of the confusion between the depth and number of bits per pixel used to represent to framebuffer and the pixmaps in the screens memory.

Visit the device manufacturer’s website to download the latest versions. One the overall maximum, and another due to the available memory bandwidth of the chip. This option can be used in conjunction with the option “UseModeline” to program all the panel timings using the modeline values.

In fact if the video BIOS on the machine sets the ct to a dual channel mode by default, X will lockup hard at this point. Use caution with this option, as driving the video processor techologies its specifications might cause cbips. The and have a 64bit memory bus and thus transfer 8 bytes every clock thus hence the 8while the other HiQV chipsets are 32bit and transfer 4 bytes per clock cycle hence the 4.

Using this option the user can override the maximum dot-clock and specify any value they prefer. This will prevent the use of a mode that is a different size than the panel.

This might further reduce the available memory. Legal values for this key are depth dependent. However there are many differences at a register level.